China Professional Az9719470043 Universal Joint for CZPT HOWO, Shacman, FAW, Beiben

Product Description

AZUniversal Joint for CHINAMFG Howo, Shacman, Faw, Beiben

Item Name

Universal Joint

Application

heavy truck

Truck model

Sinotruk Howo, Shacman, Faw, Beiben

Certification

ISO9001

OEM number

AZ9719470043

Warranty

12 monthes

Contact 

13205420929

Packing

standard

Place of origin

ZheJiang provice, China

MOQ

1 Piece

Weight

standard

Qulity

OEM original

Adaptable automobile mode:

Chinese truck

Payment

TT, western union, L/C, paypal, et

 

  • We are specialized in the export of Trucks spare Parts,  located in the CHINAMFG of CHINAMFG ,HangZhou city,China. Mainly deal in CHINAMFG ,SHACMAN ,SANY, HINO, ISUZU, CAMC, XIHU (WEST LAKE) DIS.FENG CHINAMFG engine,mixer truck , engineering machinery parts  . we can produce special vehicles according to your demands.

    Truck Body and Body Components Parts

    S/N Products Range
    1 Cab Body ASSY, Locking Mechanism, Limiting Device
    2 Cab floor, Bumpers, Fender & Rear Fender, Air spring…
    3 Cab Door, Fog Light, Sun Visor, Hydraulic Lock Assembly…
    4 Steering Column, Front & Rear Glass, Wind-shield Wiper & washer…
    5 Window, Roof Panel, Air Heater system…
    6 Air Conditioner System, Safety Belt, Take Power Off…

    Electrical and Electronic System

    S/N Products Range
    1 Battery, Auto Horn, Regulator, Flasher, Relay…
    2 Electric Equirments, Sensor, Water Level Buzzer…
    3 Switch, Anti-theft Device, Signal Device, Motor meter…

    Engine Parts

    S/N Products Range
    1 Cylinder Head, Cylinder Liner, Crankshaft, Rod…
    2 Piston, Piston Ring, Piston Pin, Piston Cooling Nozzle…
    3 Oil Fitter, Fuel Filter, Water Filter…
    4 Oil Pump, Water Pump, Injection Pump, Transfer Pump, turbo charger…
    5. Main bearing, con.rod bearing, fly wheel, fuel tank, overhaul repair gasket kit…

    Gearbox parts

    S/N Products Range
    1 gearbox, Gearbox housing, top cover, Primary shaft, Main shaft…
    2 Countershaft, 2 / 3 gear, 2nd speed gear(1/2/3/4/5…
    3 reverse gear ,clutch bearing and seat, synchronize assembly….
    4 synchronizer slider, synchronizer ring, gearbox shell….
    5 gearbox cover, shift fork assy, PTO, bearing, oil seal, repair bag…

    Chassis parts:

    S/N Products Range
    1 front axle, steering knuckle, repair bag, tie rod end, drag link, steering tie rod….
    2 straight joint, shock absorber, wheel blot, leaf spring assy, wheel hub, gimbal yoke…
    3 centrale bearing, cross universal joint, transmission shaft, final drive, differential device assy…
    4 bearing, brake drum, wheel rim, brake shoes,brakd pads, hand brake drum, repair bag, clutch pump,..
    5 brake pump,oil pipe, vacuum booster, buffering rubber, oil seal, power steering box, oil sensor..

    Packing And Xihu (West Lake) Dis. 

If you are interested in our products, welcome to contact:
Ms. Lea Feng

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Carrosserie
Certification: ISO9001
Driving System Parts: Front Axle
Brake System Parts: Brake Control
Transmission System Parts: Clutch
Color: Black

universal joint

Can universal joints be used in precision manufacturing equipment?

Yes, universal joints can be used in precision manufacturing equipment, depending on the specific requirements and applications. Here’s a detailed explanation:

Precision manufacturing equipment often requires precise and reliable motion transmission between different components or subsystems. Universal joints can be employed in such equipment to facilitate the transmission of rotational motion and torque while accommodating misalignment or angular variations. However, their usage in precision manufacturing equipment is subject to certain considerations:

  1. Motion Transmission: Universal joints are effective in transmitting rotational motion and torque across misaligned or non-collinear shafts. In precision manufacturing equipment, where precise and synchronized motion is crucial, universal joints can provide flexibility and compensate for slight misalignments or angular variations, ensuring reliable motion transfer.
  2. Angular Accuracy: Precision manufacturing often requires maintaining precise angular accuracy during operation. While universal joints can accommodate misalignments, they introduce certain angular errors due to their design. These errors may be acceptable or manageable depending on the specific application. However, in cases where extremely tight angular accuracy is required, alternative motion transmission mechanisms, such as precision couplings or direct drives, might be preferred.
  3. Backlash and Play: Universal joints can exhibit a certain degree of backlash or play, which may affect the precision of the manufacturing process. Backlash refers to the slight movement or play that occurs when reversing the direction of rotation. In precision manufacturing equipment, minimizing backlash is often critical. Careful selection of high-quality universal joints or incorporating additional mechanisms to reduce backlash, such as preloading or anti-backlash devices, might be necessary to achieve the desired precision.
  4. Load and Speed Considerations: When using universal joints in precision manufacturing equipment, it is essential to consider the expected loads and operating speeds. Universal joints have specific load and speed limitations, and exceeding these limits can lead to premature wear, reduced precision, or even failure. Careful selection of universal joints with appropriate load and speed ratings based on the application’s requirements is necessary to ensure optimal performance.
  5. Maintenance and Lubrication: Regular maintenance and proper lubrication are crucial for the reliable and precise operation of universal joints in precision manufacturing equipment. Following manufacturer guidelines regarding lubrication intervals, lubricant types, and maintenance procedures is essential. Regular inspection of the joints for wear, damage, or misalignment is also necessary to identify any issues that could affect precision.
  6. Application-Specific Considerations: Each precision manufacturing application may have unique requirements and constraints. Factors such as available space, environmental conditions, required precision levels, and integration with other components should be taken into account when determining the feasibility and suitability of using universal joints. Consulting with experts or manufacturers specializing in precision manufacturing equipment can help in evaluating the best motion transmission solution for a specific application.

In summary, universal joints can be used in precision manufacturing equipment to facilitate motion transmission while accommodating misalignment. However, their usage should be carefully evaluated considering factors such as angular accuracy requirements, backlash and play limitations, load and speed considerations, maintenance needs, and application-specific constraints.

universal joint

What materials are commonly used in the construction of universal joints?

Universal joints are constructed using various materials that provide strength, durability, and resistance to wear and fatigue. Here’s a detailed explanation:

The choice of materials for universal joints depends on factors such as the application, load requirements, operating conditions, and cost considerations. Here are some commonly used materials:

  • Steel: Steel is one of the most common materials used in universal joint construction. Alloy steels, such as 4140 or 4340, are often employed due to their high strength, toughness, and resistance to wear and fatigue. Steel universal joints can withstand heavy loads and harsh operating conditions, making them suitable for various industrial applications.
  • Stainless Steel: Stainless steel is chosen for universal joints when corrosion resistance is a critical requirement. Stainless steel alloys, such as 304 or 316, offer excellent resistance to rust, oxidation, and chemical corrosion. These joints are commonly used in applications where exposure to moisture, chemicals, or harsh environments is expected.
  • Cast Iron: Cast iron is occasionally used in universal joints, particularly in older or specialized applications. Cast iron provides good strength and wear resistance, but it is generally heavier and less flexible than steel. It may be used in specific situations where its properties are advantageous, such as in large industrial machinery.
  • Aluminum: Aluminum universal joints are utilized when weight reduction is a priority. Aluminum alloys offer a good balance of strength and lightweight properties. These joints are commonly found in applications where weight savings are crucial, such as aerospace, automotive, or robotics.
  • Bronze: Bronze is sometimes used for bearings or bushings within universal joints. Bronze alloys provide good wear resistance, low friction, and the ability to withstand high temperatures. They are often employed in applications where self-lubricating properties and resistance to galling are required. Bronze bearings can be found in universal joints used in heavy machinery, marine equipment, or agricultural machinery.

It’s worth noting that the specific choice of materials may vary depending on the manufacturer, application requirements, and industry standards. Different combinations of materials may also be used for different components within a universal joint, such as the yokes, crosses, bearings, or seals, to optimize performance and durability.

In summary, universal joints are commonly constructed using materials such as steel, stainless steel, cast iron, aluminum, and bronze. The selection of materials depends on factors like strength, durability, wear resistance, corrosion resistance, weight considerations, and specific application requirements.

universal joint

How do you maintain and service a universal joint?

Maintaining and servicing a universal joint is essential to ensure its optimal performance, longevity, and reliability. Regular maintenance helps identify and address any potential issues before they lead to significant problems. Here are some guidelines for maintaining and servicing a universal joint:

  • Regular inspection: Perform regular visual inspections of the universal joint to check for signs of wear, damage, or misalignment. Look for any loose or missing fasteners, excessive play, or abnormal noise during operation. Inspect the lubrication condition and ensure it is adequate.
  • Lubrication: Proper lubrication is crucial for the smooth operation of a universal joint. Follow the manufacturer’s recommendations for lubrication type, quantity, and intervals. Regularly inspect the lubrication condition and replenish or replace the lubricant as necessary. Ensure that the lubrication points are accessible and apply the lubricant directly to those points.
  • Torque specifications: When performing maintenance or service tasks that involve fasteners or connections, adhere to the manufacturer’s torque specifications. Over-tightening or under-tightening can lead to issues such as stress concentration, fatigue, or premature failure of the universal joint.
  • Alignment: Ensure that the connected shafts are properly aligned. Misalignment can cause excessive stress and wear on the universal joint components. If misalignment is detected, take appropriate measures to correct it, such as adjusting the shafts or using shims or spacers.
  • Fasteners: Regularly inspect and tighten all fasteners, including bolts, nuts, and retaining clips. Check for any signs of corrosion, damage, or wear on the fasteners. Replace any damaged or worn fasteners with suitable replacements according to the manufacturer’s specifications.
  • Seals and boots: If your universal joint has seals or boots, inspect them for damage or deterioration. Damaged seals or boots can lead to contamination or loss of lubricant, affecting the performance and lifespan of the joint. Replace any damaged or worn seals or boots promptly.
  • Operational monitoring: During operation, monitor the universal joint for any abnormal vibrations, noises, or temperature changes. Unusual vibrations or noises can indicate misalignment, wear, or other issues. Excessive heat can be a sign of insufficient lubrication or excessive friction. If any abnormalities are observed, investigate and address them promptly.
  • Service intervals: Follow the recommended service intervals provided by the manufacturer. These intervals may include tasks such as lubrication, inspection, re-greasing, or complete disassembly and reassembly. Adhering to the recommended service intervals helps maintain the optimal performance and reliability of the universal joint.
  • Expert assistance: If you encounter complex issues or are unsure about any maintenance or service tasks, seek assistance from a qualified professional or the manufacturer. They can provide specific guidance, troubleshooting, or perform more in-depth servicing if needed.

Proper maintenance and servicing of a universal joint contribute to its longevity, performance, and overall system reliability. By regularly inspecting the joint, ensuring proper lubrication, alignment, and fastening, and addressing any issues promptly, you can maximize the lifespan and efficiency of the universal joint in your mechanical system.

China Professional Az9719470043 Universal Joint for CZPT HOWO, Shacman, FAW, Beiben  China Professional Az9719470043 Universal Joint for CZPT HOWO, Shacman, FAW, Beiben
editor by CX 2023-12-20